Products

A36 Round Steel Bar
A36 is a low-carbon steel containing manganese, phosphorus, sulfur, silicon and copper. A36 has good weldability and high yield strength. A36 carbon steel bar is commonly used as a variety of structural steel parts.
+8617685728684
Contact Us
<
>
Product Parameters

Carbon Steel: Properties, Production, Examples and Applications


Carbon steel is an iron-carbon alloy, which contains up to 2.1 wt.% carbon. For carbon steels, there is no minimum specified content of other alloying elements, however, they often contain manganese. The maximum manganese, silicon and copper content should be less than 1.65 wt.%, 0.6 wt.% and 0.6 wt.%, respectively.


Types of carbon steel and their properties


Carbon steel can be classified into three categories according to its carbon content: low-carbon steel (or mild-carbon steel), medium-carbon steel and high-carbon steel . Their carbon content, microstructure and properties compare as follows:



Carbon content (wt.%)MicrostructurePropertiesExamples
Low-carbon steel< 0.25Ferrite, pearliteLow hardness and cost. High ductility, toughness, machinability and weldability
Medium-carbon steel0.25 – 0.60MartensiteLow hardenability, medium strength, ductility and toughness
High-carbon steel0.60 – 1.25PearliteHigh hardness, strength, low ductility



Carbon Steel Description



Grade:


1)GB: Q195, Q215, Q235A, Q235B, Q235C, Q235D, Q255A, 255B, Q275, Q295A, Q295B, Q345B, Q345C, Q345D, Q345E, Q390A, Q390B, Q390C,Q390D, Q390E, Q420, Q420B, Q420C, Q420D, Q420E, Q460D, Q460E, Q500D, Q500E, Q550D, Q550E, Q620D, Q620E, Q690D, Q690E


2)EN: S185,S235JR, S275JR, S355JR, S420NL, S460NL S500Q, S550Q, S620Q, S690Q 


3)ASTM: Grade B, Grade C, Grade D, A36, Grade 36, Grade 40, Grade42, Grade 50, Grade 55, Grade 60, Grade 65, Grade 80 


4)JIS: SS330, SPHC, SS400, SPFC, SPHD, SPHE



PRODUCT DETAILS



A36  Round Steel Bar Description
A36 is  a carbon structural steel whose chemical composition and mechanical  properties strictly conform to American ASTM standards. A36 steel bar mainly consists of iron, carbon,  silicon, manganese, phosphorus, sulfur and other elements. Iron constitutes more than 99% of the entire chemical composition. Its carbon content proportion is relatively  high, around 0.2%,  ensuring that the steel has a certain hardness and toughness. The addition of  silicon, manganese and other elements enhances the strength and toughness of  steel. Phosphorus  and sulfur are low so that the steel bar has  good welding performance and corrosion resistance. A36 steel bar is used for  welded, bolted or riveted construction of bridges and buildings, as well as  for general structural purposes. Due to its lowest yield point, A36 can be  used to design lighter-weight structures and equipment, and provide good  weldability.


Product   Parameters
Product NameA36 Round Steel Bar
StandardEN/DIN/JIS/ASTM/BS/ASME/AISI, etc.
Common   Round Bar Specifications3.0-50.8 mm, Over 50.8-300mm
Flat   Steel Common Specifications6.35x12.7mm, 6.35x25.4mm, 12.7x25.4mm
Hexagon   Bar Common SpecificationsAF5.8mm-17mm
Square   Bar Common SpecificationsAF2mm-14mm, AF6.35mm, 9.5mm, 12.7mm, 15.98mm, 19.0mm, 25.4mm
Length1-6meters, Size Accept Custom
Diameter(mm)Hot Rolling   Round Bar25-600Cold   Rolling Square Bar6-50.8
Hot Rolling Square Bar21-54Cold   Rolling Hexagon Bar9.5-65
Cold Rolling Round bar6-101.6Forged Rebar200-1000
Surface ProcessBright, Polished, Black
Other   ServicesMachining(cnc), Centerless Grinding(cg), Heat   Treatment, Annealing, Pickling, Polishing, Rolling, Forging, Cutting,   Bending, Small Machining, etc.


Chemical Composition
CCuFeMnPSiS
0.25～0.2900.2981.030.040.280.05
Physical  Performance
Physical PerformanceMetricImperial
Density7.85 g/cm30.284 lb/in3
Scope of  Application
Bolted,  riveted or welded structures for bridges, buildings and oil drilling rigs.
Used  for forming storage tanks, silos, bearing plates, fixtures, rings, templates,  fixtures, sprockets, cams, gears, bottom plates, forgings, decoration  engineering, piles, brackets, automobiles and agricultural equipment, frames,  mechanical parts, etc.
Equivalent Material
National  Standard GBEuropean  Standard ENAmerican  Standard ASTMGerman Standard DIN,WNrJapanese  Standard JISFrench Standard AFNORBritish  Standard BSCanada HG
Q235BS235JRA283CSt37-2SM400AE24-240A/40B230G
Italy UNIIndia ISSwitzerland SSAustralia ONORMNorway NSSpain UNEInternational Standards ISOPortugal NP
Fe360BIS20621311/1312RSt360BNS12123AE235B-FNE235B/Fe360BFE360-B


Certificate
Our-Certifications-jpg-[原始大小].jpg
Factory Display
  • 图片-(12).jpg
  • 图片-(4).jpg
  • 图片-(11).jpg
  • 图片-(2).jpg
Product Packaging
  • 1 (7).png
  • 1 (5).png
  • 1 (2).png
  • 24ed4ebb65f2f8e2e559e5ee190fe453.jpeg
Product Application
  • f40725e78672c41a85e3800a358ab2d8.jpeg
  • b207b49a73c60b748a1849c2f9ff7bcc.jpeg
  • c409c4eef272fdbf45536b75d4b4d46a.jpeg
  • c545d874458a7329db22a541dc229bfe.jpeg
FAQ

Are you a trading company or a manufacturer ?

We are manufacturer. Every month, we do a procurement for a massive number of steel material from Chinese state owned mill. The total value of steel processing equipment is more than 30 million dollars. Our major products cover all category of steel industry, and it is totally compatible to all kind of world steel standard.

 

Do you have large amount of steel products in stock ?

Yes, we do. In large-scale indoor warehouses, the total stock value is over 150 millions dollar.

 

Do you provide the samples ? Free or Extra ?

It is free, depend on the value of the sample. The cost of the freight would be charge.

 

How long is the delivery time ?

Officially, it is within 7 days. Actually, we can deliver within 3 days. Customized products or non-standard size products would be taken 10-30 days to deliver, depend on the production cycle. Generally, most of the products finished and delivered within 20 days.

 

Do you accept the third party inspection ?

Absolutely yes!

 

How could you guarantee your products ?

Each batch of products must have its own factory inspection report. If the third-party inspection report of the product you purchased does not match our factory inspection report, we will resend the goods, and we will carry all the costs by ourselves.

 

How can I get your quotation as soon as possible ?

You may have many methods to contact us. Email and fax will be checked within 12 hours, and Skype, WeChat and WhatsApp will be online in 24/7. Please send us your requirement, attaching specification (Steel grade, dimension, quantity, destination port) or any you are concerned, you will obtain a competitive price and supply solution soon.

Contact Us
Submit
Product Recommendation